-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Samsung
- HELP DYSPLAY

Create an account on the HP Community to personalize your profile and ask a question
12-11-2018 03:39 AM
Dear Support-Team,
i tried to upgrade my Samusung CLX-4195FW/SEE printer from the original firmware version V4.00.01.12 to the newest version CLX4195FW_V4.00.02.34 via network. Unfortunately the update got stuck at 23%. The display on the printer showed that number for almost an hour and the programm on the pc said after a while that the printer does not respond any more and the updated failed. I downloaded the files directly from the hp support website and followed the "4195fw_Release Note_English.pdf" instruction carefully.
Screen at update freeze
Error at the pc
After switching the device on and off it shows on the display the error "UI Firmware upgrade was completed unsuccessfully !!" and "Please upgragde UI firmware again for recovery.". After a while additionally the a blue text appears: "UI Communication Error. The machine should be restarted for recovery."
Screen now
After this i tried to just run the firmware upgrade again, but the software on the pc tells that it is not required and the upgrade over the SyncThru Webservice just uploads the firmware and then stays at the "programming" status forever.
Printing from the PC still works and i can still access the SyncThru Webservice, but the Display and its functions are not available.
Through the SyncThru Webservice the version information is showing, that the system firmware version is "V4.00.02.34 SEP-02-2015" but the UI Firmware version is "V5.08.50.56 07-05-12".
Version information on SyncThru Webservice
My first impression is that may be due to a bug in the firmware upgrade the display / UI has not been updated and thus the communication between the main system and the display does not work anymore.
Is there a way to fix this issue?
Is there a way to force a firmware upgrade of the UI?
Thanks in advance and best Regards!