-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Samsung
- Samsung ML 1670 internal error after upgrade to Fedora 30

Create an account on the HP Community to personalize your profile and ask a question
05-10-2019 02:43 AM
After the upgrade of Fedora to version 30, I am getting the following error with any document which has an image, even if I convert it to grayscale:
INTERNAL ERROR - uw_color == 4
POSITION : 0x0 (0)
SYSTEM : h6fw_5.49/x1_image
LINE : 341
VERSION : SPL 5.49 10-20-2010
Thanks
05-13-2019 09:51 AM
Hi anil-50
Does the same issue occur with another OS?
I ask you this because Samsung does not develop the software for LINUX. In case that you just have this OS my recommendation is trying contact a 3rd party LINUX software developer to check what altternative he could offer you.
Regards.
05-26-2019 05:38 AM
Hi, I have the exact same problem with my printer (ML-1675 , the same family and driver). It used to work in both Ubuntu and Fedora prior to version 19.04 and 30 respectively. The driver downloadable from HP support site for linux for this printer is: "uld_V1.00.39_01.17.tar.gz". This driver works fine for sure in:
Ubuntu 18.04, Ubuntu 18.10, Fedora 29.
But in both Ubuntu 19.04 and Fedora 30 it doesn't anymore. The printer gets detected and drivers automatically installed but the output on paper is always as below (1 page prints with this text):
INTERNAL ERROR - uw_color == 4
POSITION : 0x0 (0)
SYSTEM : h6fw_5.49/x1_image
LINE : 341
VERSION: SPL 5.49 10-20-2010
The printer itself is OK for sure as I am able to print from a VM with Ubuntu 18.04 and redirected USB port for this connected printer. The driver used is exactly the same.
05-26-2019 10:29 AM
I got the solution from:
https://www.bchemnet.com/suldr/forum/index.php?topic=363
I used the source from Fedora 29 - cups version 2.2.8-10 and could build it on Fedora 30 without any issues and the printer works.