Add time stamp to scan to network folder from device

[Alvintc]

I'm looking for a way to add a timestamp to the destination network folder. This option is available in the scan software, but this isn't useful if the printer is remote.

[Andr-1611]

Hello @Alvintc ,
Welcome to the HP Support Community!

Try these settings here:

Hope this helps! Keep me posted.
Andr-1611

If my post resolved your problem please mark this post as an "Accepted Solution".
Or click on the YES button to reply that the response was helpful and/or to say “Thank You”.

[Alvintc]

HI Andr-1611,

As mentioned - I know those settings are in the software, however when you use scan to network folder from the MFD it uses the settings entered in the admin web page:

[Andr-1611]

Hi Alvintc,

you should have admin rights over the network.
Please read this information here.

With kind regards
Andr-1611

[Alvintc]

Hi Andr-1611,

I do have admin rights and scan to folder is working fine. However with multiple users, simply adding "scan" or more accurately a static prefix is extremely limited.

I think we're boiling down to, it's not possible from the MFD but is from the software, which is not overly helpful. Case in point - I want to scan a bunch of receipts as separate files, I would have to go from the printer to the computer for each individual receipt just to add a timestamp!

(I do appreciate the help though!)

[Alvintc]

Any other suggestions on this this one?