All-in-One printer works but copier doesn't. Help

[winnereitherway]

I have an HP Envy 7640 All-in-One printer. When I print from the computer it prints fine but when I try to make a copy, it looks like my ink is low and it's not. I've looked at settings. If I do color setting it's worst than black. Can anyone explain?

[Jay_G24]

Hi @winnereitherway

Welcome to the HP Support Community. I'd be happy to assist you with the  "Copy quality" issue. 

Try the steps below to resolve the issue -

Copies have poor resolution, wrong colors, or blurry text

If copies are faded, blurred, or have the wrong colors compared to the original, check the copy settings and troubleshoot printer hardware and ink-related issues.

NOTE: 

Make sure the original being copied is high enough quality. If copy resolution is too low or copy quality is poor, scan the original into the computer, and then use the editing tools in the HP scanning software to improve the image quality. Print the new version and use it as the original for the copy job.

Step 1: Change copy settings

Adjust color, contrast, and enhancement settings from the printer control panel menu to improve copy quality.

NOTE: 

For printers without a control panel menu, most models use default normal copy settings that cannot be changed. As a workaround, scan the original into the computer, and then use the editing tools in the HP scanning software to improve the image quality. You can then print multiple copies of the edited scan file.

1. Touch Copy, Copy Document, or Copy Photo on the printer control panel, and then select any available basic settings that apply to your copy job.

2. Touch Settings or the gear icon  to open the copy job options. You might need to scroll down the control panel screen to access all settings.

   • Paper Type: Select the type of plain or photo paper for your copies.

   • Quality: Select an available copy quality level.

   • Lighter/Darker or Contrast: If the original is faded or too saturated, make the copy lighter or darker.

   • Optimize or Enhancements: Select the type of item you are copying to improve quality, such as sharpening text and image edges or improving faded colors in photos.

   • HP Copy Fix: Automatic copy quality and skew adjustment tool.

   • Save Current Settings or Set as New Defaults: Retains the selected settings for future copy jobs.

3. Depending on the printer, touch Start, or return to the main Copy screen by touching Back, and then touch Start Black, Start Color, or OK to start the copy job.

Step 2: Reset the printer and check the power source

Reset the printer to clear certain error states, and then check the power source to make sure the printer is getting enough power to operate the copier.

1. With the printer turned on, disconnect the power cord from the printer, disconnect the power cord from the power source, and then wait 30 seconds.

2. If you are using a power strip or multi-plug adapter, connect the cord directly to a wall outlet to make sure the printer is getting enough power.

3. Reconnect the power cord to the printer, and then try making a copy.

Refer to the document-Resolving Copy Problems

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!