Deskjet 2700 freezes when I try to scan

[Stefan999]

My printer freezes when I try to scan. The freeze takes place when she scan is complete. The scanner remains at the opposite site and the scanning light remains on. Software such as HPsmart, HP Scanner, HP print and scan Doctor stop. I can reset the device using the On/Off button. Printing and copying work fine.

[sandytechy20]

@Stefan999

Welcome to the HP support community.

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
6. Turn on the printer.

Update the printer firmware

Here are the steps:- Click here

Perform root level uninstallation to remove all the printer related software's.

• In Windows, search for and open Programs and Features.
• Select your HP printer.
• Select Uninstall.
• In Windows, search for and open Devices and Printers.
• In the Devices and Printers window look for your HP Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”
• Open up the run command with the "Windows Key + R" key combo.
• Type printui.exe /s and click OK.
• Click on Drivers tab.
• Look for HP Printer driver. If you see it click on it and click Remove at the bottom.
• Select OK.
• Remove all instances of the same.
• Select Apply and OK on the Print Server Properties windows.
• Close Devices and Printers. 
• Restart the PC again.

Download and install printer full feature driver

Click here to download the driver.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[Stefan999]

This did not work. I couldn't update the printer software because it is already actual.

[sandytechy20]

@Stefan999

Use HP Print and Scan Doctor to fix this issue.

Download HP Print and Scan Doctor.

1. Run HPPSdr.exe from the download location on your computer.

2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

3. If a screen prompts you to turn on printer updates, click Yes.

4. If a screen prompts you to make your printer the default printer, click Yes.

5. Try to print.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.