Printer Failure message

[290Orange]

Printer Failure message coming

[Betty0610]

@290Orange

Let's try to reset the Printer here as it helps in removing any stored static electricity from the Printer which might be causing these issues.

1. Turn the printer on, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
7. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
8. Reconnect the power cord to the rear of the printer.
9. Turn on the printer, if it does not automatically turn on.
10. Wait until the printer is idle and silent before you proceed.

If the issue persists, let's update the Printer firmware: https://support.hp.com/in-en/document/c02919168

If the issue still persists, please perform the remaining steps from this document under "The 'Printer Failure' message does not include an error code": 

https://support.hp.com/us-en/product/hp-officejet-pro-8600-plus-e-all-in-one-printer-series-n911/432...

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!