-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Scanning, Faxing, and Copying
- Printer issue

Create an account on the HP Community to personalize your profile and ask a question
03-25-2019
07:06 PM
- last edited on
07-03-2026
10:43 AM
by
Raj_05
Welcome to the HP Support Community
If only the Web Services light blinks, an ePrint email print job has been blocked.
I suggest you do a Hard Reset on the printer
(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Then, click on this link: https://support.hp.com/za-en/product/hp-deskjet-3700-all-in-one-printer-series/8954253/model/1126203... and follow instructions.
Refer to this document: https://support.hp.com/za-en/product/hp-deskjet-3700-all-in-one-printer-series/8954253/model/1126203... for Blinking Lights.
Keep me posted, how it goes!
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!
Have a great day!
Cheers:)
Raj1788
I am an HP Employee