Scanner failure message

[Libgirl]

Scanner Failure message. Instructs to turn off and turn on again. I have done so several times. This is an old printer, but it is a workhorse. I want it to work. Great printer forever.

It isn't a bulb issue. 

[Kumar0307]

Hi @Libgirl

Welcome to the HP Support Community. I'd be happy to assist you.

Try making a standalone copy and check if that works. By this, we can conclude if this is a hardware or a driver issue.

Reset the printer (Skip if tried)

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Check the scanner bar functionality

Perform a visual test of the scanner mechanism to see if it is jammed.

1. Remove any original documents or photos from the scanner glass.
2. Lift the scanner lid slightly, and then press the Copy button or icon.

If the scanner light does not move or moves halfway or is not lit, the scanner mechanism is likely jammed/broken.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!