Won't print, scan, or copy

[User487563]

I can print a test page just fine, but it will not print from computer.  It also just spins and waits when you try to make a copy-black and white or color.

[Jay_G24]

Hi @User487563,

I'd like to help!

I understand you are unable to copy or print from the computer.

 To assist better -How is the printer connected to the device USB or wireless?

Meanwhile, try the below suggestions 

Reset the product

With the printer turned on, disconnect the power cord from the rear of the printer.

Unplug the power cord from the wall outlet.

Wait at least 60 seconds.

Plug the power cord back into the wall outlet.

Reconnect the power cord to the printer.

Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

 Also, try updating the printer's firmware -HP Printers - Updating or Upgrading Printer Firmware  

Try and make a copy.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping

[Sum_ATL]

I tried printing from Laptop (Windows/ Mac), mobile phones (Android/ iOS) and the jobs are just stuck at the printer. I am getting error message on mobile phone stating printer blocked spooler error.

I am connecting to printer through Wifi.

I tried copying at the printer and even that doesn't work. Test page is printed just fine. I already performed reset, checked ink levels, performed alignment.

[Jay_G24]

 Try the steps on the windows computer-

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

To set a manual IP and try the steps below -

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 Connect the printer to TCP/IP port

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

Let me know how this goes!

[Sum_ATL]

Thanks for the steps. I wanted to clarify one thing that the printer is printing test page and alignment page. Also, I am unable to print anything through mobile or laptop. The job status at the printer shows printing but nothing happens. I end up cancelling the job at printer.

[Jay_G24]

Were you able to try the steps on your Windows computer?

Let me know!

[Sum_ATL]

I ran the app, I received one message that port issue was fixed but still the evaluation page job was stuck at the printer.

What other option do I've now?

[Jay_G24]

Let's try and uninstall the printer software from the root level on your PC and install the full feature printer software.

First, unplug the USB cable from the printer if present.

• Go to Control panel – Programs and feature – Select all the HP printer entries and uninstall them.
  • Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
  • Restart your computer.
  • Click the bottom-left Start button on desktop, type device manager in the search box and tap Device Manager on the menu.
  • Once in device manager, click on the view tab in the top & choose “Show hidden devices”.
  • Then from the device manager list, check the entries under “Printer” – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device". 
  • Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says “Unknown device”.
  • Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" and press enter.
  • Under print server properties, go to drivers - remove any entry there as well.
  • Again, go running window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
  • Once done you can try cleaning out your temporary files and cached files. You can try using automated applications like some cleaner software's that you can download from the internet.
  • Now restart your computer again.
  • Open the Run window again, type “services.msc” and press ok to get services window.
  • Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.
  • Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.
  • Repeat the same exercise on “Function Discovery Resource Publication” as well
  • Windows image acquisition stop and restart the service 

Reinstall the drivers from the Software and drivers page

Let me know how this goes!