copying problems with laserjet 235

[kooyong]

the number of copies shown in the display window is stuck on 70. its a laserjet 235.

[BeemerBiker]

Probably needs to be reset.  I found this for the model 234 but probably works on 235

• Turn the product on while you press and hold the Resume button for 10-20 seconds.
• The Attention light turns on. Release the Resume button.
• The Attention and Ready lights cycle while the product restores factory defaults.

You will have to reconnect but no need to download any drivers\

This video shows how to connect to the router: 234sdw
Wi-Fi Direct can be used to avoid configuring the router. Watch this: 234sdw
A simple connection to the router can be done by using the WPS pushbutton method. This is explained on page 14 in this User Manual.

One or more printer reference is listed below. Typically your printer may be part of a series and use the same software and manual. The exact spec may be different.

Specifications for your system: 234sdw 235sdw 235dwe

[Valsimot]

@kooyong that's not number of copies, that is error 70

[kooyong]

Thanks but it doesn’t solve the problem. It is not showing as “error” 70, just 70. I can alter this through the +- tabs but as soon as i print it reverts to 70. I have tried switching the printer power off/on but nothing seems to help. Any further help would be much appreciated.