hp deskjet 2700 series will not print full pages

[wildwoman1]

installed new printer have aligned it , will not print or scan full pages cuts off top part when scaning ,cuts off bottom part when printing from laptop using windods 10

[Jay_G24]

Hi @wildwoman1,

I'd like to help!

To assist better-

1) Does the copy print out the same way? 

2) What's the application you are trying to print from? Have you tried printing from a different application or device? 

While you respond to that, let's print a Print Quality Diagnostic page -

1. Open HP Smart and select your printer.

2. Click Printer Reports, or click Tools and then click Printer Reports.

   The list of reports displayed.

3. Select Print Quality Report.

   The printer prints the Print Quality Diagnostic page.

Post the Print Quality Diagnostic page here so we can help you further. 

You may also refer to this document with steps to fix the " Print Quality Issues" issue applicable for your printer -  Print Quality Issues

 Also, try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware 

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping!