• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
HP officejet pro 8610

pages are streaking when scanned, long vertical streak on left side of page

3 REPLIES 3
HP Recommended

@Victor1220, Welcome to HP Support Community!

 

Vertical or horizontal lines or color bands are typically caused by fingerprints, smudges, or debris on scanner parts, cartridge issues, or there is a power or calibration issue with the scanner mechanism.

 

Clean the scanner glass and underside of the scanner lid with a soft, lint-free cloth sprayed with glass cleaner.

  1. Turn the printer off, disconnect the power cord, and then lift the scanner lid.

  2. Spray a soft lint-free cloth with glass cleaner.

       CAUTION: 

    To protect interior printer parts, do not spray cleaner directly on the glass or lid.

  3. Wipe the main scanner glass, glass strip, and the white backing and automatic document feeder (ADF) strip under the lid until clean, dry, and streak-free.

  4. If any debris remains stuck to any parts, use your fingernail to scrape it off, and then wipe the area again.

Clean the scanner glass and  under the lid, and any glass or white strips

  1. White scanner lid backing

  2. White ADF scanner lid strip (if present)

  3. Glass ADF scanner strip (if present)

  4. Main scanner glass

Clean the plastic and glass strips inside the document feeder with a soft, lint-free cloth sprayed with glass cleaner.

NOTE: 

Some printers ship with a document feeder cleaning cloth. If you have the cloth, load it into the document feeder and start a copy job to clean the scanner mechanism.

  1. Turn the printer off, disconnect the power cord, and then remove the battery if your printer has one.

  2. Depending on your printer model, open any top cover, document feeder tray, and scan document feeder cover.

  3. Look for and remove any dust or debris from inside the document feeder.

  4. Spray a soft, lint-free cloth with glass cleaner, and then wipe the scanner glass and the white strip on the underside of the document feeder until clean, dry, and streak-free.

       CAUTION: 

    To protect the interior printer parts, do not spray the cleaner directly on or into the printer.

  5. Securely close any covers and trays that you opened.

  6. Reconnect the power cord to the printer, and then try making a copy.

Clean the ADF rollers

If lines in copies persist when using the ADF, clean the rollers or separator pad.

  1. Turn the printer off, disconnect the power cord, and then open the ADF cover.

  2. Find any paper pick rollers and the separator pad inside the ADF. These parts have a rubber coating.

    Paper pick rollers and separator pad in the ADF

  3. Lightly dampen a clean, lint-free cloth with distilled or filtered water, squeeze any excess liquid from the cloth, and then wipe any residue off the rollers and separator pad.

  4. Leave the ADF cover open for two minutes to allow the parts to dry, and then close the cover.

  5. Reconnect the power cord to the printer, and then try making a copy.

Reset the printer and check the power source

Reset the printer to clear certain error states, and then check the power source to make sure the printer is getting enough power to operate the copier.

  1. With the printer turned on, disconnect the power cord from the printer, disconnect the power cord from the power source, and then wait 30 seconds.

  2. If you are using a power strip or multi-plug adapter, connect the cord directly to a wall outlet to make sure the printer is getting enough power.

  3. Reconnect the power cord to the printer, and then try making a copy.

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

HP Recommended

I followed all the directions and it still has those lines on one side-- only when scanning, not when printing. Any more ideas?  thanks!

HP Recommended

@Victor1220

 

This looks like a hardware issue.

 

Please reach out to the HP Support in your region regarding the service options for your printer.

 

Hope this helps!

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.