Copy function not working

[Joniroz007]

Copy function not working. Seems like it is stuck in some mode. Tried rebooting several times. Fax scan and print from computer work but when copying nothing happens

[Kumar0307]

@Joniroz007, Welcome to the HP Support Community!

Are you able to Scan from the PC fine? Scanning and copying use same mechanism.

Do you get any errors while making a copy?

Let us try these steps to resolve this issue:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Update the printer firmware

Click here to download and install the latest firmware from your computer.

Click here to know different methods of updating printer firmware.

Also, Check the scanner bar functionality

Perform a visual test of the scanner mechanism to see if it is jammed.

1. Remove any original documents or photos from the scanner glass.
2. Lift the scanner lid slightly, and then press the Copy button or icon.

If the scanner light does not move or moves halfway or is not lit, the scanner mechanism is likely jammed/broken.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!