Resolve Windows 10 related issues for your HP computers or printers by HP Windows 10 Support Center
Ok so I reloaded my sprocket n now it’s printing blanks. Why?
Go to Solution.
@Wallymarrero Welcome to HP Forums!
I have a few steps to help you out:
Step 1: Turn on the Sprocket and check battery status
The Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting.
Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery chage is 24% or lower, charge the battery for 30 minutes, and then continue with these steps.
Tap Auto Off to change when the Sprocket turns off, if necessary.
If the issue persists, continue to the next step.
FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE
(By the end of this article all the issues should be resolved)
Let me know how that pans out,
If you feel I was helpful, simply click on Accept as Solution to help the community grow,
That said, I will have someone follow-up on this to ensure you've been helped,
Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.
Riddle_Decipher I am an HP Employee
View solution in original post
Didn't find what you were looking for?
Ask the community