Pc didnt start coreectly

[Rachit3]

Sir,  my hp notebook didn't start properly. Even after restart it shows the same.  It just shows 'automatic repair' and shows your pc didn't start properly.  So please help me in this issue. 

[A4Apollo]

Hey there! @Rachit3,

Try restoring the BIOS to defaults and check if it helps.

1.    Turn off the computer and wait five seconds.
2.    Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3.    On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4.    Press F10 to Save and Exit.
5.    Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6.    Follow the prompts to restart your computer.

Try the steps recommended below.

If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop.

Turn on the PC keep tapping the F11 key to boot into the recovery manager.

Step 1 Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt; 

Step 2 Enter the following lines and press Enter after each line to run it:bootrec.exe /rebuildbcd bootrec.exe /fixmbr bootrec.exe /fixboot. Then restart the PC.

If the bootrec.exe command doesn't fix the automatic repair loop, some suggest that you should run chkdsk commands as well.

Also, try performing a system reset on the PC and check if it helps.

Refer this article to know more information about performing a system reset. Click Here

Lastly, try running a system diagnostics test on the PC and check if the hardware components on the PC are functioning correctly.

Refer this article to know more information about running system diagnostics on your PC. Click Here

Let me know if this works!

I hope you have a great day! 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!