Envelope printing

[Knitski]

I am able to print envelopes with my laptop but am wondering if there is a way to print them using my android phone. I downloaded the app called phone to envelope but the HP smart app doesn't give envelope as a choice in the setup.

[Riddle_Decipher]

@Knitski First thing you'll need to do, is check if the envelope size/type is supported by your printer: click here to verify the printer paper handling specifications (select your printer)

If it is supported, here's what you need to do:

• Since the option is not showing up in the HP Smart App, I suggest you can change the tray settings on EWS and try printing,

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[Knitski]

I have two questions. If I am able to print envelopes using my laptop and word processor doesnt that mean envelopes are supported? Second question. What does EWS mean?

[Riddle_Decipher]

@Knitski Here's all you need to know about EWS: click here

And yes, if it prints using word or any software, it means that it supports it.

Let me know if you need anything else.

[Parker_D]

Thanks for the information Download iMessage for PC.

[TEJ1602]

@Parker_D

You're welcome 🙂

[Knitski]

I found where to change the tray and paper management. I changed the small setting to #10 envelope and the paper type to specialty. Now when I try to print an envelope the app gives me a different choice but it still isn't envelope

[Riddle_Decipher]

@Knitski I recommend you upgrade the printer firmware using the details listed below:

And then try using the envelope again, after restarting the device.

 Lets start with power reset as per HP standards, here's how we recommend doing it:

• Turn the printer on, if it is not already on.
• Wait until the printer is idle and silent before you continue.
• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
  • NOTE: 
  • HP recommends connecting the printer power cord directly to the wall outlet.
• Reconnect the power cord to the rear of the printer.
• Turn on the printer, if it does not automatically turn on.
• Wait until the printer is idle and silent before you proceed.

If the issue persists, please upgrade the printer firmware:

click here for different ways of getting this done using a computer among others.

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.