-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- Who Me Too'd this topic

Create an account on the HP Community to personalize your profile and ask a question
01-23-2017 10:13 AM
HP500-549
Originally came with W8.1
Upgraded to W10 64bit almost a year ago. Never had any issues.
BIOS ver was "original":
80.02 Rev.A HP Consumer Desktop PC BIOS Update (ROM Family SSID 2B35)
Yesterday, updated BIOS to "recommended" rev:
A0.07 Rev.A HP Consumer Desktop PC BIOS Update (ROM Family SSID 2B35)
Immediatelly PC went into 8 beeps and "HP BIOS UPDATE":
- The System BIOS is being recovered
- The System BIOS recovery is complete. Upon restarting the screen may be blank, etc.
Goes into BLUE Screen: A System BIOS Recovery has occured. BIOS Recovery (500). ENTER - Continue Startup. For more information, please visit: www.hp.com/go/techcenter/startup
I've tried so many options:
- Created a USB drive with latest BIOS. The update goes smoothly as above, then on reboot beeps 8 times and goes into Recovery again
- Tried to press Esc to get into UEFI - no luck. Wanted to get to "Rollback" option
- When i tried to flash with the original 80.02 Rev.A firmware - it "did not pass validation", or would simply say that BIOS recovery Failed.
- When i flash BIOS with A0.07 Rev.A - everything goes normal, but on restart it beeps 8 times and goes into loop.
MayDay! SOS!
Solved! Go to Solution.