Printer Setup, Software & Drivers

I am trying to install an HP Laserjet 1320 printer on a new Windows 11 computer.  I saw some posts on this forum and followed them about installing the HP Universal driver PCL 5 .  Here is the instructions I followed from Elohi_NR - https://h30434.www3.hp.com/t5/Printer-Setup-Software-Drivers/I-want-to-download-driver-for-HP-Laserj... -

Try the following solution:

1. Download and then run (UPD PCL 5):
   
   • This driver if the Windows version is 64-bit.
   • This driver if the Windows version is 32-bit.
2. Select the Traditional Mode, and then click on Next.
3. Select the Add a local printer or network printer with manual settings, and then click Next.
4. Click the Use an existing port drop-down list and select DOT4_001: (HP Print Device), then click Next.
5. Under Printers, select HP Universal Printing PCL 5, and then click Next.
6. The Printer name field, type HP LaserJet 1320 series, and then click Next.
7. Follow the instructions to complete the installation.
8. Try to print.

My problem is when I get to the part of choosing an existing port, I do not see the option of DOT4_001: (HP Print Device).  Here is what is displayed:

LPT1: (Printer Port)

LPT2: (Printer Port)

LPT3: (Printer Port)

COM1: (Serial Port)

COM2: (Serial Port)

COM3: (Serial Port)

COM4: (Serial Port)

FILE: (Print to File)

nul: (Local Port)

PORTPROMPT: (Local Port)

Please let me know if you have a suggestion or solution.  Thanks.