-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Gaming
- Gaming Notebooks
- Who Me Too'd this topic

Create an account on the HP Community to personalize your profile and ask a question
06-15-2025 02:47 PM
Problem Diagnosis – HP Victus 15 (DAG3PAMB8D0 REV D)
The failure is in a single-phase buck converter circuit near the inductor labeled PL 1R0. The dual MOSFET (PQ) in a 3×4 mm WSON package is severely burned and shorted, likely due to a VIN-to-VOUT short during battery reconnection. This caused high current flow, overheating, and carbonization of the PCB.
Surrounding components (MLCC capacitors and 0402 resistors) show signs of thermal damage, and the PWM controller (PU) may also be compromised.
The failed converter likely supplies a secondary rail (e.g., +1.05V or +1.8V) to the chipset. The board won't power on until the shorted MOSFET is removed, damaged traces cleaned, and all affected parts are checked and replaced.
Photos of the burned part:
https://drive.google.com/drive/folders/1q_LODiRg8vsbiFxGhTp3dmL9P7qDRU6L?usp=drive_link
I am searching for board schema, or even a whole new motherboard to replace
motherboard model:
DAG3PAMB8D0 REV:D
MODEL G3PA