cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Kappalandi
Level 2
14 7 1 2
Message 1 of 3
277
Flag Post

Solved!

Can a HP 8300 SFF motherboard and processor be installed in a HP 8000SFF?

HP Recommended
HP 8000SFF
Microsoft Windows 10 (64-bit)

Can a HP 8300 SFF motherboard and processor be installed in a HP 8000SFF?

1 ACCEPTED SOLUTION

Accepted Solutions
DGroves
Level 11
4,757 4,036 449 925
Message 2 of 3
Flag Post
HP Recommended

the boards and power supplies are the same in terms of mounting points and power connections, the 8000 and the 8300 have the same ports  and locations for the rear I/O and since these systems cases use stamped cutouts for the ports they are interchangeable for most later models

 

i'm running a 6200 case with a 8300 board installed, note that the only main difference between the 6200 6300 8300 is the onboard SATA, 620 is SATA 3 6300 is one each SATA 3/6 and 8300 is two SATA 6 ports

 

 

the elite 8000/8200/8300 and the 6000/6200/6300 pro are interchangeable (the HP 6005 is also interchangeable)

as all models use the same rear I/O layout and power supplies

 

the earlier 4000 systems are not interchangeable due to a different rear I/O config

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
DGroves
Level 11
4,757 4,036 449 925
Message 2 of 3
Flag Post
HP Recommended

the boards and power supplies are the same in terms of mounting points and power connections, the 8000 and the 8300 have the same ports  and locations for the rear I/O and since these systems cases use stamped cutouts for the ports they are interchangeable for most later models

 

i'm running a 6200 case with a 8300 board installed, note that the only main difference between the 6200 6300 8300 is the onboard SATA, 620 is SATA 3 6300 is one each SATA 3/6 and 8300 is two SATA 6 ports

 

 

the elite 8000/8200/8300 and the 6000/6200/6300 pro are interchangeable (the HP 6005 is also interchangeable)

as all models use the same rear I/O layout and power supplies

 

the earlier 4000 systems are not interchangeable due to a different rear I/O config

View solution in original post

Was this reply helpful? Yes No
Kappalandi
Author
Level 2
14 7 1 2
Message 3 of 3
Flag Post
HP Recommended

Thank you so much. I really appreciate it. Stay safe.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation