• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
Locked

‎02-20-2019 05:05 AM

HP Recommended

Hi

 

A.5.01 upgrade utility works on usb only. I have tried upgrading to A.4 works fine.

 

when upgrading to A.5.01 visa windows XP or 7 nothing is sent to the printer.

 

tried also changing to another usb cable.

 

I can't upgrade the printer

 

any solution

 

Thanks

Was this reply helpful? Yes No

‎08-31-2019 12:15 PM - edited ‎08-31-2019 12:23 PM

HP Recommended

Sorry for my bad syntax, my English not so good...

I use Windows 10 Pro and i use Lan cable for plotting throught lot of PC's with my office topic network...

With Lan cable nothing happens...

I disconnected Lan cable and connected plotter with 3m USB cable (tried 2 different cables, one 5m and another 3m, worked with 3m USB cable). Turned off and then turn on for Win10 to find it....

Here: https://support.hp.com/us-en/product/hp-designjet-500-printer-series/25301/model/1834668/document/c0... says: "Open the zip file and run the HP DesignJet 500/800 Firmware Upgrade Tool A.05.01"

Same... nothing happened, no firmware was send....

 

The first thing that usually do somebody is to "unzip" the zip file....

I think that was the wrong...

When I "double click" zip file, it oppened with Winzip and IN there I gone to exe upgrade file and runned it!!!! From INSIDE the Zip file!

 

It started to send firmware and on plotter front panel i saw all the procedure....

At the end on panel screen saw a picture to UNPLUG from power cable the plotter (NOT from the power button!). Then plug on again, then plotter started and at the "Plotter Information" now I see firmware A.05.01 !!!

 

Be carefull, for that procedure you have to have firmaware A.02 and later.... That message displayed throught the procedure when double clicked update exe file....

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.