Deskjet 5075 - setting static IP

[marcin2x4]

I've setup static IP via printer's interface (printer assigned static IP automatically)

Do I need to do a setup on router level as well or is above step enought?

I understand that in case of unplugging/turning off the printer will not lose the IP?

[Raj1788]

@marcin2x4

Welcome to the HP Support Community

Use the below steps to Assign Manual IP to the printer:

1) Print a Network configuration page from the printer's control panel. 

2) Look for IP address from the Network configuration page. 

3) Open web browser - Chrome or IE or any other browser that you are using. 

4) Type the IP address mentioned on Network configuration page into the browser's address bar or URL bar and press enter button. 

5) Go to the Network tab. 

6) Click on Networking from the left pane. 

7) Then click on Network Address (IP). 

😎 Click on Manual IP Address and go to suggest a Manual IP. 

9) Scroll down the screen and select Manual DNS server. 

10) Enter the Primary and secondary DNS server from the Network Configuration page into the Manual Preferred DNS server field. 

11) Click on Apply. 

Refer to the video link for step by step instructions - https://www.youtube.com/watch?v=SCnYyq80V9g 

Note: The video is for win 8 but steps are similar for other operating systems as well. You need to enter the IP address in the browser's URL or the address bar to access the printer page.

Hope this helps you!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)