-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Hi,
Have you installed the HP driver for your printer?
If not, from the Start Menu select Settings > Devices > Printers & Scanners and remove any instance of the listed 7500A printer, if it is connected with a USB be sure to unplug the cable first and restart your computer.
Right-click the Start menu and select Run, type the following and press OK:
Spoiler
printui /s /t2
Remove any instance of your printer, be sure to select to remove both driver and its driver package and confirm, then close this dialog.
Download and install below software for your printer:
https://ftp.hp.com/pub/softlib/software12/COL34809/mp-109374-3/OJ7500_E910_1315-1.exe
For a USB connection, do not plug the cable till the installation clearly asks to do so.
May you see any difference now?
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
HP Recommended
Hi,
Have you installed the HP driver for your printer?
If not, from the Start Menu select Settings > Devices > Printers & Scanners and remove any instance of the listed 7500A printer, if it is connected with a USB be sure to unplug the cable first and restart your computer.
Right-click the Start menu and select Run, type the following and press OK:
Spoiler
printui /s /t2
Remove any instance of your printer, be sure to select to remove both driver and its driver package and confirm, then close this dialog.
Download and install below software for your printer:
https://ftp.hp.com/pub/softlib/software12/COL34809/mp-109374-3/OJ7500_E910_1315-1.exe
For a USB connection, do not plug the cable till the installation clearly asks to do so.
May you see any difference now?
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community