-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Re: HP Design Jet 1050c setup
Create an account on the HP Community to personalize your profile and ask a question
10-12-2018 11:03 PM
I recently purchase a HP Design Jet and Im a having a few issues setting up the machine, Everytime I try to load media wether it is on a roll or just a single sheet of paper I get the roll misaligned error. I have it exactly on the blue line like it asks but then when the light goes over it to verify the media is loaded correctly I get the error saying it is not. I have tried numerous attempts to get it right, i figured just trying a plain piece of pape would be the easiet way , But I still get the erorr, Any Help is greatly appreciated I look forward to using this machine.
Solved! Go to Solution.
Accepted Solutions
10-14-2018 12:03 PM
Check the following video on YT
https://www.youtube.com/watch?v=mXWVYoJUk-c
From the moment when the top cover is closed in a video, compare what is your printer doing when the top cover is closed and what is doing the one on the video, and what are the differences?
10-13-2018 06:07 AM
Have you tried to load roll while a printer is turned OFF?
You will need to push paper harder to get it in the printer then adjust it to a blue line as best as you can, lower paper lever and turn printer ON to see what will happen.
10-13-2018 10:59 AM
I tried your suggestion by manually feeding the paper through the machine, still no luck, I have it exactly square on the blue line, but everytime when the blue light goes over it to check the alignment I get the mispositioned erorr. Is there some sort of sensor that needs cleaning, Im despreatley trying to get this machine printing. ANY HELP IS GREATLY apprieciated.
10-14-2018 11:32 AM
still no luck, keep getting the "Sheet mispositioned, Reload Sheet, Align Sheet with Vertical and Horizontal blue lines,"
Im so despreate to get this thing working and hate that I cant even get past the ability for the machine to load a piece of paper? Is there a specific forum where they have troubleshooting for this kind of issue, ANY HELP IS GREATLY APPRECIATED, I would even be willing to paypal some money to someone who could walk me though this and get this machine printing.
10-14-2018 12:03 PM
Check the following video on YT
https://www.youtube.com/watch?v=mXWVYoJUk-c
From the moment when the top cover is closed in a video, compare what is your printer doing when the top cover is closed and what is doing the one on the video, and what are the differences?
Didn't find what you were looking for? Ask the community