• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
Designjet T1600
Other

I have a Designjet T1600 blocked with the message "No installation package found".

This message is not documented in the service manual.

The rear leds are:

Led 1 Red fixed

Led 2 Red blinking

Led 3 Off

This leds combination indicates an issue with the hard disk.

How to know if it is an hardware or software problem?

In case of software problem, is there a way to rebuild or update the interenal hard disk?

1 REPLY 1
HP Recommended

download and copy the firmware fmw file to a usb stick (formatted fat32). Insert the stick into the front USB port and then power on the device. Plotter will find the firmware and prompt if you want to update the firmware.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.



† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.