• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about cartridges, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
hp designjet 110 plus
Microsoft Windows 10 (64-bit)

When I send a print to the printer through the roll assembly , the paper keeps on feeding through the printer continuously  non-stop and does not print.

 

Can anyone help?

 

Thank you 

Raphael

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Can you print an internal page from the printer's control panel successfully? or does it feed paper the same way as when you send a job?

 

If the problem only occurs when sending a print job to the printer from your computer, these are the possibilities:

1) The wrong printer driver is being used

2) The print driver is corrupt

3) Data/signal corruption in the cable.

4) Bad formatter/NIC

 

Possible fixes:

1) Delete and reinstall the printer driver with the latest from HP.

2) Check/replace the data cable

3) Replace the NIC or formatter.

View solution in original post

2 REPLIES 2
HP Recommended

Can you print an internal page from the printer's control panel successfully? or does it feed paper the same way as when you send a job?

 

If the problem only occurs when sending a print job to the printer from your computer, these are the possibilities:

1) The wrong printer driver is being used

2) The print driver is corrupt

3) Data/signal corruption in the cable.

4) Bad formatter/NIC

 

Possible fixes:

1) Delete and reinstall the printer driver with the latest from HP.

2) Check/replace the data cable

3) Replace the NIC or formatter.

HP Recommended

I reinstalled the drivers as recommended and so far the issue is resolved.

 

Thank you very much

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.