cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
OrangeMoon
New member
2 1 0 0
Message 1 of 4
514
Flag Post

T920 stuck in the initializing process...

HP Recommended
T920

Hello everyone! I´m trying to find out what happened to our T920 firmware. The printer was unplugged for 6 weeks due to holidays, and today it did n´t restart normally; after reinstalling the 2018 firmware, it get stuck in 16% initializing process, it warns that there is a 63:20 problem and after telling it to continue it do not get more that 16% advance. I´ve called the HP phone support and they told me to unplug the printer and restart it but we are in the 16% loop. Thanks in advance for your help. Best regards!

Tags (1)
3 REPLIES 3
Valsimot
Level 12
Level 12
6,345 6,328 754 1,062
Message 2 of 4
Flag Post
HP Recommended

It would be something network related to electronics.

 

https://support.hp.com/za-en/document/c03800464 

 

If you haven't tried disconnect printer from the network and try the unplugging again.




My profile on LinkedIn

Was this reply helpful? Yes No
OrangeMoon
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Hi Valsimot, thanks for answering. The plot twist is that our printer never has been connected to any network. We only use it to print files from USB drives.

 

Was this reply helpful? Yes No
chris1designjet
Level 4
63 63 4 10
Message 4 of 4
Flag Post
HP Recommended

Dear Sir 

remove any usb before starting the protter 

try to redownload the right firmware on a usb fat 32 formatted and install the usb before starting plotter ,if  it finds the firmware and it checks it before installing it . please do pay attention to not switch off the printer when the firmware is installing till the plotter restarts by it self  or you will destroy the booting process.

https://ftp.hp.com/pub/softlib/software13/COL51655/MRY_06_00_06.1.fmw

if it is the same or an error 08:11 comes out you need a hp support to replace your hard drive 

let me know 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation