cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Haechi
New member
1 0 0 1
Message 1 of 5
1,504
Flag Post

Z6200 prompt "Load paper for next job" but paper has loaded, still cannot print

HP Recommended
Z6200
Microsoft Windows 10 (64-bit)

I'm encountering this issue when paper roll ran out but I still sending print job to the Z6200.

So the front panel showed "Load paper for next job" and I tried to clear those jobs sent to Z6200.

 

When I load the paper to the Z6200 and trying to print, it prompted me "Load paper for next job" but the paper has loaded.

The front panel show that there is paper loaded but it just can't print.

 

Each image file I send via website, the printer will stop responding with the "Load paper for next job" message. I have to cancel or deleting the file.  Deleting the file will take everlasting to do and I have to restart the printer again in order those deleting can be gone.

 

So, the problem is each time I tried to send print job to the printer, it will stop and prompt me the message.

 

Any procedures or ways to fix this issue?

 

4 REPLIES 4
Copier46
New member
2 2 0 0
Message 2 of 5
Flag Post
HP Recommended

we're in the same situation.

 

we send job,

the printer does not print and there is no error !!!

 

we tried 

  - update firmware

  - another paper type (photo, coated, plain, 914mm, 620 mm etc.)

  -  clean the printheads

 

but there is no solution?

 

is there anybody solve this problem??

Was this reply helpful? Yes No
jasonmiamifl
Level 7
880 810 37 84
Message 3 of 5
Flag Post
HP Recommended

go to printer control panel & check to see how many Z6200 printer there ?    if only one. ok.... if more than one,

remove it...

   (  one time I went to customer location to fix  Z3100 printer problems. I checked & found there were 4 same printers )

if above check ... check go to printer display panel... queque management..... delete the hourglass   print jobs..

 

 

This is all I could think of....  See if any luck....

Was this reply helpful? Yes No
Copier46
New member
2 2 0 0
Message 4 of 5
Flag Post
HP Recommended

we did uninstall and install at least 5 times.

 

but there is no solution. 

Was this reply helpful? Yes No
jasonmiamifl
Level 7
880 810 37 84
Message 5 of 5
Flag Post
HP Recommended

Maybe the print quequ was suspended & need to resume   ??

 

go to the printer property  >>    what is printing  ..  cancel all documents ..  click pause   ... resume...

 

see any luck

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation