Showing results for 
Search instead for 
Did you mean: 
Level 2
16 14 0 1
Message 1 of 2
Flag Post

designjet z3200 44" error 22.2:10

HP Recommended
designjet z3200
Microsoft Windows 7 (64-bit)

  ( revised  topic 22.2:10 )

unsolved mistery :

my Z3200 44" printer was working beautifully, then few months ago gave me error 22.2:10. So I replaced

the right side ink station... it worked flawlessly for about 2 weeks.

Then again, same error.... bought 2 good one on Ebay & replaced it.... all perfectly fit..

same error..... then 2nd one.... same error.


As soon as printer starting up & get to initialize   ( not eve get to check inks, printheads etc )
service station had little noise & error came right up...


replaced formatter board..... parameter reset ....print mech board, without inks..... without printheads...

any possibility I could ever think of..... dead end..


hope expert here could give me a hint...


thank you very much......

D Hook
Level 7
821 769 34 90
Message 2 of 2
Flag Post
HP Recommended

Have you tried booting up the printer without the ink and printheads installed?

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation