-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- error 61:01 on a z6200

Create an account on the HP Community to personalize your profile and ask a question
04-05-2018 06:23 AM
I am trying to print from mac on our z6200. But it keeps comming up with the error 61:01. I have tried with different drivers, both from hp's homepage and the one that is on the original cd. I have tried on 3 different mac's. Works fine on pc.
Also tried updating the firmware on the printer. But it still doesn't seem to work.
04-05-2018 12:07 PM - edited 04-05-2018 12:08 PM
Hi
I'm guessing here...
It is a Language/File Format thing. The output file is wrong.
Change the graphic language setting
You can change the graphic language setting from the HP Utility with the following steps.
1. Under Windows, select the Settings tab then Printer settings > Printing preferences.
Under Mac OS, select Configuration then Printer settings > Configure printer settings > Printing references.
2. Select one of the following options.
Select Automatic to let the printer determine which type of file it is receiving. This is the
default setting; it works for most software applications. You should not normally need to
change it.
Select HP-GL/2 only if you are sending a file of that type directly to th
e printer, without going through a printer driver.
Select PDF only if you are sending a file of that type directly to the printer, without going
through a printer driver (with the PostScript/PDF upgrade).
Select PostScript only if you are sending a file of that type directly to the printer, without
going through a printer driver (with the PostScript/PDF upgrade).
Select TIFF only if you are sending a file of that type directly to the printer, without going through a printer driver.
Select JPEG only if you are sending a file of that type directly to the printer, without going
through a printer driver.
You can change the graphic language setting from the front panel. Select the Setup menu icon , then Printing preferences > Select graphic language. Select the desired option and press the OK key to set the value.
04-12-2018 03:11 AM
Hi,
Cause:
The file format is incorrect and the printer cannot process the job
Solution:
● Try to do a first level of troubleshooting by : Turn off the printer using the switch at the rear, and disconnect the power cord. Reconnect the power cord and turn on the printer.
● If it doesnt help, check the graphic language setting of the printer
I am speaking for myself and not for HP
Please click the Thumbs up icon below to say “Thanks” for helping! .
If my post help resolve your issue, please mark as "RESOLVED"