cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Bobby17
Level 3
50 31 5 0
Message 1 of 2
450
Flag Post

Solved!

printer to computer by way of routher

HP Recommended
designjet 5500ps 42 inch
Microsoft Windows 7 (32-bit)

OK here is what is going on

 

I tried to attach olotter to computer by way of router.

When I installed the driver for the designjet 5500 series  version 4.1.100.1332 it starts and gives me a plotter to highligh and istall. But the error comes up ..... setup was unable to complete the installation.....

 

So I thought it was windows firewall blocking install, so I disconnected the internet and turned off windows firewall

 

now I get the message ....install network protocols    windows  tcp/ip

 

the attaching cable I am using is

 

cat 6 patch cable, 4 pair upt obtained from ebay link below

 

http://www.ebay.com/itm/14FT-Cat6-Bare-Copper-24AWG-Patch-cable-pick-from-8-colors/162328561929?ssPa...

 

Before I attempted this I reset the I/O card and got a new ip address from plotters front pannel

 

the router I am using is a Net gear wireless router model WGR614W9  I am using 1 of the hardwire ports and not a wireless one

 

I know when dealing with network setup if you do one thing or type one thing wrong you open up a BIG can of worms !

 

thanks for any help

1 ACCEPTED SOLUTION

Accepted Solutions
davidzuts
Level 13
7,130 6,101 558 938
Message 2 of 2
Flag Post
HP Recommended

I have no idea what driver you are trying to install and what method you are using. Below is a link to the driver you should be using and below that are instructions on the method to install.

 

https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-designjet-5500-printer-series/82218/mo...

 

Once you download the driver you need to run the downloaded program. A box will come up with a directory path highlighted in blue. You change that path to read C:\5500 and then click on the unzip button. Now on the computer go to devices and printer and choose add printer, local printer and then choose create port and in the drop down choose standard tcp/ip, next and put in the ip address of the printer and remove the check mark in the query printer and then next and when you get to the makers page, say have disk and then navigate to the C:\5500 folder in your c drive and continue and choose the inf file and click ok ahd then you choose your model and finish up the installation and it should now work.

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
davidzuts
Level 13
7,130 6,101 558 938
Message 2 of 2
Flag Post
HP Recommended

I have no idea what driver you are trying to install and what method you are using. Below is a link to the driver you should be using and below that are instructions on the method to install.

 

https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-designjet-5500-printer-series/82218/mo...

 

Once you download the driver you need to run the downloaded program. A box will come up with a directory path highlighted in blue. You change that path to read C:\5500 and then click on the unzip button. Now on the computer go to devices and printer and choose add printer, local printer and then choose create port and in the drop down choose standard tcp/ip, next and put in the ip address of the printer and remove the check mark in the query printer and then next and when you get to the makers page, say have disk and then navigate to the C:\5500 folder in your c drive and continue and choose the inf file and click ok ahd then you choose your model and finish up the installation and it should now work.

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation