-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Re: unknown hardware error at Designjet 70
Create an account on the HP Community to personalize your profile and ask a question
07-06-2019 04:10 AM - edited 07-06-2019 04:11 AM
My designjet 70 give me the following hardware error which I couldn't find it in the manual, so I don't know how to solve it:
Hardware error symbol doesn't appear in the picture because is flashing..
I have windows 10( 64bytes) installed and till now printer works perfectly with the driver for windows 8-the most recent compatible.
Also HP system diagnostic maintenance give me the message that "unable to communicate with printer", and from win 10 devices and printers, after I start the printer, I can see that the printer change it's status from offline to "setup incomplete because of metered connection".
I replaced the PC-printer cable with a new one, but there are no changes.
Does anybody knows what error is this?
Thank you
Solved! Go to Solution.
Accepted Solutions
07-06-2019 01:04 PM
Check for service manual regarding service station removal
https://shared.swissparts.ch/Manuals/HP/Plotter/HP%20Designjet%2030-111.pdf
The service manual doesn't explain how to repair the individual part, only how to replace it. It's all up to you how you are handy with your hands and tools.
maybe something is blocking cleaners inside the service station, maybe a good cleaning will help, maybe it's the motor or gears it could be several reasons why you have 21 error.
07-06-2019 01:04 PM
Check for service manual regarding service station removal
https://shared.swissparts.ch/Manuals/HP/Plotter/HP%20Designjet%2030-111.pdf
The service manual doesn't explain how to repair the individual part, only how to replace it. It's all up to you how you are handy with your hands and tools.
maybe something is blocking cleaners inside the service station, maybe a good cleaning will help, maybe it's the motor or gears it could be several reasons why you have 21 error.
07-07-2019 07:21 AM - edited 07-07-2019 11:08 AM
I think something is blocking cleaners inside because after I press those 2 buttons for cleaning printheads, it try to start but nothing happened.
Thank you very much for answer and I am really gratefull for your help.
Didn't find what you were looking for? Ask the community