Custom Config File for VVX Polycom Phone

[ChunKeat]

Hi, I am trying to provision the phone, and on top of that, I'm trying to load custom config file to configure BLF line and enabling the Group Paging. Is there anything that I did wrongly?

Below is my cfg file:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<POLYVOICE>

<BLF


attendant.behaviors.automata.pickupOnBusy="1"
attendant.behaviors.display.remoteCallerID.automata="1"
attendant.behaviors.display.remoteCallerID.normal="1"
attendant.behaviors.display.spontaneousCallAppearances.automata="0"
attendant.behaviors.display.spontaneousCallAppearances.normal ="1"
attendant.behaviors.display.spontaneousCallAppearances.normal ="1"
attendant.behaviors.preserveCallerIDOnPickup="1"
attendant.callWaiting.enable ="1"
attendant.callWaiting.ring ="beep"
attendant.restrictPickup="0"

attendant.reg="1"

attendant.resourceList.1.address="+61999999000"
attendant.resourceList.1.label="xxxx"
attendant.resourceList.1.type="automata"

attendant.resourceList.2.address="+61999999001"
attendant.resourceList.2.label="xxxx"
attendant.resourceList.2.type="automata"

attendant.resourceList.3.address="+61999999002"
attendant.resourceList.3.label="xxxx"
attendant.resourceList.3.type="automata"

attendant.resourceList.4.address="+61999999003"
attendant.resourceList.4.label="xxxx"
attendant.resourceList.4.type="automata"

/>

<LINEKEY

feature.enhancedFeatureKeys.enabled="1"
feature.EFKLineKey.enabled="1"
lineKey.reassignment.enabled="1"

lineKey.1.index="1"
lineKey.2.index="1"
lineKey.3.index="2"
lineKey.4.index="3"
lineKey.5.index="4"

lineKey.1.category="Line"
lineKey.2.category="BLF"
lineKey.3.category="BLF"
lineKey.4.category="BLF"
lineKey.5.category="BLF"

/>

<PAGING

ptt.address="224.1.0.1"
ptt.port="5001"
ptt.pageMode.displayName="Paging"
ptt.pageMode.enable="1"
ptt.pageMode.group.1.available="1"
ptt.pageMode.group.1.allowReceive="1"
ptt.pageMode.group.1.allowTransmit="1"
ptt.pageMode.group.1.subscribed="1"


/>



</POLYVOICE>

[SteffenBaierUK]

Hello @ChunKeat ,

Welcome to the HP community.

Unfortunately, your post does not contain the currently used Software version for the HP Poly product or the actual Model.

This is important, especially in the future, when someone finds this post in days, months, or years.

Please do not simply edit the original post, but reply with the versions.

In the FAQ or the Read 1st section, we remind users why this is important.

Also from this FAQ:

Nov 4, 2011 Question: How can I set up a Busy Lamp Field / BLF with a Digium Asterisk SIP Server, or are there limitations?

Resolution: Please check => here <=

Jan 12, 2012 Question: Can I change / re-assign the appearance of  Line, BLF, Busy Lamp Field, Speed Dial, Presence Keys, or Secondary Screen?

Resolution: Please check => here <=

Jan 21, 2014 Question: How can I use PTT / Push To Talk / Paging / Page ?

Resolution: Please check => here <=

If no other volunteers reply, I suggest you contact our Support organization in your region. Details are in my Signature.

Best regards

Steffen Baier