• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The Poly Phones Knowledge Base is live! We look forward to helping you with common issues and troubleshooting advice!
Locked

‎11-22-2013 06:50 AM

HP Recommended

I have a Polycom CX100 on a certain PC. After standby the the device shows error code 37 , also if you unplug it and put it back in you get the same issue.  I have updated the chipset and the usb drivers on the unit = same issue.  the unit was tested on another pc and worked fne. also took a know good device and swapped it in same exact issues. same model too . 

 

i checked a couple posts and it says to get the driver from microsoft , i do not like this , primarily becuse you cant find it there 

 

please let me know of any thought or solution to repaitr this , or if there is some knowledge on this that i am not finding. 

 

 

ty 

 

 

 

 

1 REPLY 1

‎11-22-2013 07:48 AM

HP Recommended

Hello TZ,

welcome to the Polycom Community.

Polycom does manufacture the CX100 but all driver support comes from the Microsoft LYNC client and any issues would need to be reported via Microsoft.

 

It is most likely an incompatibility of your yet unknown operating system and the motherboard chipset drivers.

 

The Error message is produced by the Microsoft driver so you would need to inquire with Microsoft.

 

You already excluded a hardware issues as the same unit works on another PC.

 

Please ensure, once you contact Microsoft or use one of their community's to at least mentioned the model / manufacturer of the PC and what operating system you are using.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Was this reply helpful? Yes No
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.