• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Microsoft Windows 10 (64-bit)

 

Hello together.

 

I have a problem with the mainboard: 

Joshua-H61-uATX (Joshua)

 

The specifications https://support.hp.com/us-en/error?errorType=404&source=document&documentId=c03135925

are not available.

 

The USB - port are locked and i tried to reset the BIOS by using the jumper.

The configuration now is: 


1,2 Jumper

3,X

5,6

7,8

 

I tried to fullfill a CMOS reset and by changing the Jumper positions to 5,6 an 7,8.

nothing worked until now.

 

I although tried to contact foxconn for the motherboard specifications.

I guess it will be a strange combination of jumper setting.

 

Joshua-H61-uATX (Joshua)

  • Hersteller: Foxconn
  • Formfaktor: uATX – 24,4 cm x 24,4 cm
  • Chipsatz: Intel H61
  • Speichersockel: 2 x DDR3
  • Geschwindigkeiten des Front-Side-Busses: 5 GT/s
  • Prozessorsockel: LGA 1155
  • Erweiterungssteckplätze:
    • 1 PCI Express x16 (Gen2.0)
    • 3 PCI Express x1 (Gen2.0)
    • 1 PCI Express Mini Card x1
  • Weitere Informationen hierzu finden Sie unter Spezifikationen der Hauptplatine Joshua.

 

 

 

2 REPLIES 2
HP Recommended

The jumpers are the two blue ones

BeemerBiker_1-1664804699569.png

One of the is the CMOS reset the other is probably password.  Alternately you can remove the battery -

1 - unplug from wall

2 - press power switch 3-4 times

3 - touch finger to metal case

4 - remove battery for  30 seconds

 

Your motherboard is used in the following system

https://support.hp.com/us-en/product/hp-pavilion-p6-2200-desktop-pc-series/5258508/model/5282756/pro...

Possibly all the bios and driver updates will work but the HP support assistant should have found all needed updates

 

the jumper you described earlier is probably the bios SPI programming header.


Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
HP Recommended

hi

https://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Blank-screen-after-changing-some-parameters-in...

to check, you have the procedure indicated here ..



 

--------------------------------------------- Signature ---------------------------------------------
was this reply helpful , or just say thank you ? Click on the yes button

Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem




Desktop-Knowledge-Base
Windows 11 22h2 inside , user

------------------------------------------------------------------------------------------------------------
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.