cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
215
Flag Post

New HP Envy 32 all in one shut down after 3-5 minutes ob.

HP Recommended
HP ENVY ALL-IN-ONE 32-a0xxx
Microsoft Windows 10 (64-bit)

This is a completely new PC. When it first start up, it updates drivers and BIOS. Then it starts to shut down by itself after few minutes on. Then, after a while it start working well. This morning, when I wake up, the computer updates the BIOS again, F.15, on July/03/2020 and since then, it just remain on on Windows for about 3-5 minutes and then it shutdown. It happen only while on windows, it doesn’t hapoen while on BIOS. I didi reinstalled the BIOS again thinking that it will solve the problem but not.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
12,982 12,959 1,018 984
Message 2 of 2
Flag Post
HP Recommended

@JACMeSPA, Welcome to HP Support Community!

 

Does the device turn off suddenly with its lights off as well? or do the lights remain on and only the screen blacks out?

Also, do you know if any updates were recently installed or interrupted during an update?

 

Meanwhile, here's what you need to do:

If Windows suddenly shuts down without warning, it might be caused by one of several issues.
A BIOS update can also resolve the issue: click here for steps.

 

Follow the steps in this section, in order, to run a hardware test to identify any issues with the device:

Install the latest version of the HP Hardware diagnostics (UEFI) on your device using this link: Click here for details

  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  • On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.
  • Click Extensive Test.
  • Click Run once, or Loop until error.
  • While the test is running, the time remaining and test result for each component display on the screen.

If a component fails a test, write down the failure ID (24-digit code) for when you respond back to us.

 

TEJ1602
I am an HP Employee

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation