cancel
Showing results for 
Search instead for 
Did you mean: 
Thayes1
New member
2 1 0 0
Message 1 of 3
257
Flag Post

Unable to boot into BIOS recovery

HP Recommended
Envy 23-o014
Microsoft Windows 8 (64-bit)

My all in one update the bios and now will not boot up. When i use the windows key/B and power up it goes to a dos screen and says to press esc to enter the start menu but nothing happens. I've tried different key combinations but it is always the same, same screen and will not proceed or bring up any menu... i even bought the recovery USB but cannot access it so it is useless at this point.

 

2 REPLIES 2
MikeEnders
Level 1
16 4 0 0
Message 2 of 3
Flag Post
HP Recommended

I have the same problem.  The only differences are Window 10 operating system and Envy c030.  When I press the ESC key, what I expect to see is a startup menu, not just the words "startup menu."

0 Kudos
Thayes1
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

I just had a tech look at mine, says it will need a new motherboard. I've pulled my HD so i can get some data off i need and will just buy another desktop. The cost of repair is close to 1/2 of a new one.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation