• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Locked

‎03-07-2020 02:30 PM

HP Recommended
Product: M01-F0024
Operating System: Microsoft Windows 10 (64-bit)

I have an HP Desktop (M01-F0024) that has a AMD Ryzen 5 3400G CPU and Erica 2 Motherboard.  My idle temps are around 45C (113 F).  Are there adjustments in the Bios to help lower the temps or is a new cpu cooler the better way to go?  I have contacted HP and they could not recommend a different cooler. 

1 ACCEPTED SOLUTION

Accepted Solutions

‎03-07-2020 02:45 PM

HP Recommended

If your idle temps are 45C then that is excellent. You will not see a great difference with a beefier cooler. I have a home built Ryzen 7 2700X with a ThermalTake Silent 12 cooler and my temps are not quite that low at idle. I honestly would not worry about the temps as you are well below the high mark (around 90C) where you should worry. I am not sure if that is an HP proprietary cooler or the Wraith Spire but either way it should be plenty. Usually a beefier cooler on the Ryzen is only required if you are overclocking.

My Info:
"Currently owning an Elitedesk 600 G3 running smooth as silk with Windows 11. But servicing Desktop and laptops running Windows"

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1

‎03-07-2020 02:45 PM

HP Recommended

If your idle temps are 45C then that is excellent. You will not see a great difference with a beefier cooler. I have a home built Ryzen 7 2700X with a ThermalTake Silent 12 cooler and my temps are not quite that low at idle. I honestly would not worry about the temps as you are well below the high mark (around 90C) where you should worry. I am not sure if that is an HP proprietary cooler or the Wraith Spire but either way it should be plenty. Usually a beefier cooler on the Ryzen is only required if you are overclocking.

My Info:
"Currently owning an Elitedesk 600 G3 running smooth as silk with Windows 11. But servicing Desktop and laptops running Windows"
Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.