-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Installing a MXM video card into HP Elite 8300 ultraslim

Create an account on the HP Community to personalize your profile and ask a question
10-06-2016 02:10 PM
Installing a MXM video card into HP Elite 8300 ultraslim.
I get three long beeps at start up and system does not boot.
I know you can install MXM video card because your manuals describe removal in the teardown section. Also in the manual for" Illustrated Parts & Service Map" it Says "AMD Radeon HD 7650A (MXM) 687445-001" which is the exact video card I have.
Already updated to the latest bio firmware
Solved! Go to Solution.
Accepted Solutions
10-06-2016 03:18 PM
Hi,
Did you buy part number 687445-001 from HP ?
http://partsurfer.hp.com/Search.aspx?SearchText=687445-001
If not, please return that card and buy card from HP. Actually retail card and HP part are not the same.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
10-06-2016 03:54 PM
Yes I bought the exact part. Because the system didn't come with one originally I'm thinking maybe there's a pin on the board that needs to be installed. Or something in the bios that needs to get configured before I install the card. But I've looked at both the things and can figure anything out.
12-30-2016
05:20 PM
- last edited on
12-30-2016
06:28 PM
by
danny-r
I have an original heatsink that came off the 1 GB card. But it does not have a fan. I ended up using ((((OEM 0PGH1N Dell VOSTRO 360 INSPIRON ONE 23020 AIO GPU Heatsink w/ Fan PGH1N.))) Then just making a plug for it to plug into the UBS header that is located just in front of the card location. It snaps right onto the card no modification needed
If you would like the original heatsink send me a message through email at [personal information removed] but like I said it doesn't have a fan but I guess the fan in the back of the unit was supposed to cool it.
I also doubled them in my unit one on the inside one on the outside with a Y plug for extra cooling. Although it doesn't really seem to need.