-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- Re: PC won't boot to windows

Create an account on the HP Community to personalize your profile and ask a question
11-24-2019 05:33 PM
This pc is 4 years old, it won't boot into windows. I did a system quick test and I get an error Id.
FAILURE ID: Q4L7XQ-84H9S8-WPTWMG-60X903
Im not sure what it means, what should I do?
Solved! Go to Solution.
Accepted Solutions
11-24-2019 05:40 PM
Hi:
The error code reported, Hard Disk 1 Quick Test Failure, means the hard drive needs to be replaced, and the operating system reinstalled.
Consult the service guide below, for your PC for the hard drive removal and replacement procedure.
http://h10032.www1.hp.com/ctg/Manual/c04717103
After you replace the hard drive, you can reinstall W10 for free by making a bootable USB installation flash drive using the media creation tool at the link below.
https://www.microsoft.com/en-us/software-download/windows10
If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.
Then you can install the drivers and available software from your PC's support page.
11-24-2019 05:40 PM
Hi:
The error code reported, Hard Disk 1 Quick Test Failure, means the hard drive needs to be replaced, and the operating system reinstalled.
Consult the service guide below, for your PC for the hard drive removal and replacement procedure.
http://h10032.www1.hp.com/ctg/Manual/c04717103
After you replace the hard drive, you can reinstall W10 for free by making a bootable USB installation flash drive using the media creation tool at the link below.
https://www.microsoft.com/en-us/software-download/windows10
If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.
Then you can install the drivers and available software from your PC's support page.