-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- Re: Secure Boot Recovery Boot Loop

Create an account on the HP Community to personalize your profile and ask a question
11-08-2026 09:43 PM
Hello, as some games have been trying to switch on over to secure boot I have been trying to get my computer to use secure boot. And have been messing with it (probably when i should have not) but here is what im running into.
I followed an Old form that looked as if it was going over my issue in specific do i remember the form no..but the responses were positive and even recent ones seemed to help them out but my issue comes from my Secure Boot being on in my BIOS but off in Windows for whatever reason that issue happened i would not know, however I followed some simple procedures at first but they did not resolve my problem and i researched it further, from Clearing Keys, to loading factory defaults and turning on and off TPM I am in a boot loop now the only way to fix it is force shutting down my computer and causing a CMOS reset even then after i turn off the computer and go to turn it back on It still goes back into the Boot loop, here is where my system information is now and then the following will be a screenshot of my boot error.
Solved! Go to Solution.
Accepted Solutions
11-10-2026 10:33 AM
Hi @Haiwwy_
Welcome to the HP Support Community.
Thank you for posting your query.
Clearing your keys and restoring factory defaults wiped the Secure Boot signature database (DB) stored in your motherboard firmware. On systems running Windows 11 with updated boot loaders, clearing this database leaves the firmware unable to read or validate the Secure Boot certificates, trapping the computer in a Microsoft Secure Boot Recovery loop.
Note regarding error code: While the specific error code 0x800000000000000E is not explicitly indexed by name in the sources, the exact error screen (Microsoft Secure Boot Recovery Version 1.0 / aka.ms/securebootrecovery) and boot loop caused by cleared keys are documented along with the resolution steps.
Run the Microsoft Secure Boot Recovery Tool
Because your error screen points to aka.ms/securebootrecovery, you can create a USB recovery tool on another computer to restore the missing certificates to your motherboard's database:
- Format a USB Flash Drive: On a second working Windows PC, insert a blank USB drive and format it to FAT32.
- Locate the Recovery File: On that second PC (running the July 2024 or newer Windows update), navigate to C:\Windows\Boot\EFI and copy the file SecureBootRecovery.efi.
- Structure the USB: On the FAT32 USB drive, create a folder structure named \EFI\BOOT\. Paste the file inside and rename it to bootx64.efi.
- Boot and Recover: Insert the USB flash drive into your OMEN 30L desktop and boot the computer from the USB drive. The utility will run automatically and re-add the required Windows UEFI certificates back into your Secure Boot database.
Perform HP BIOS Recovery (Key Combination)
If the system fails to boot into the USB recovery tool, use HP’s emergency hardware recovery key shortcut:
- Power off: Shut down your desktop completely.
- Key Combination: Press and hold the Windows key + B simultaneously.
- Power On: While continuing to hold Windows + B, press and hold the Power button for 2 to 3 seconds.
- Release Power: Release the power button, but keep holding Windows + B.
- Wait for Flash: The screen will remain blank for roughly 40 seconds (you may hear a series of beeps) until the HP BIOS Update screen opens and automatically repairs the BIOS.
Create an HP BIOS Recovery USB Flash Drive
If the emergency key combination does not bring up the HP BIOS Update screen, you must prepare an HP BIOS update drive on another PC:
- On a second computer, go to the HP Software and Driver Downloads website and enter your specific OMEN 30L model number (GT13-1000a / 207P7AV).
- Download the latest BIOS update file, launch it, and select Create Recovery USB flash drive.
- Insert the newly created USB flash drive into your turned-off OMEN desktop.
- Hold Windows + B while holding the Power button for 2 to 3 seconds to initiate the BIOS flash from the USB drive.
Full CMOS & Embedded Controller Reset
If the boot loop interferes before keys can be pressed, perform a full hardware power drain:
- Embedded Controller Reset: Turn off the PC, unplug the AC power cord for 5 seconds, plug it back in, and turn on the system.
- Hardware CMOS Drain: Disconnect the power cable, press the power button 10 times to clear residual power, open the case to remove the CMOS battery, hold the power button down for 60 seconds, reinstall the battery, reconnect power, and hold the power button for 20 seconds upon boot.
Secure Boot troubleshooting guide
HP Desktop PCs - Recovering the BIOS (Basic Input Output System)
Take care and have an amazing day!
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.
11-10-2026 10:33 AM
Hi @Haiwwy_
Welcome to the HP Support Community.
Thank you for posting your query.
Clearing your keys and restoring factory defaults wiped the Secure Boot signature database (DB) stored in your motherboard firmware. On systems running Windows 11 with updated boot loaders, clearing this database leaves the firmware unable to read or validate the Secure Boot certificates, trapping the computer in a Microsoft Secure Boot Recovery loop.
Note regarding error code: While the specific error code 0x800000000000000E is not explicitly indexed by name in the sources, the exact error screen (Microsoft Secure Boot Recovery Version 1.0 / aka.ms/securebootrecovery) and boot loop caused by cleared keys are documented along with the resolution steps.
Run the Microsoft Secure Boot Recovery Tool
Because your error screen points to aka.ms/securebootrecovery, you can create a USB recovery tool on another computer to restore the missing certificates to your motherboard's database:
- Format a USB Flash Drive: On a second working Windows PC, insert a blank USB drive and format it to FAT32.
- Locate the Recovery File: On that second PC (running the July 2024 or newer Windows update), navigate to C:\Windows\Boot\EFI and copy the file SecureBootRecovery.efi.
- Structure the USB: On the FAT32 USB drive, create a folder structure named \EFI\BOOT\. Paste the file inside and rename it to bootx64.efi.
- Boot and Recover: Insert the USB flash drive into your OMEN 30L desktop and boot the computer from the USB drive. The utility will run automatically and re-add the required Windows UEFI certificates back into your Secure Boot database.
Perform HP BIOS Recovery (Key Combination)
If the system fails to boot into the USB recovery tool, use HP’s emergency hardware recovery key shortcut:
- Power off: Shut down your desktop completely.
- Key Combination: Press and hold the Windows key + B simultaneously.
- Power On: While continuing to hold Windows + B, press and hold the Power button for 2 to 3 seconds.
- Release Power: Release the power button, but keep holding Windows + B.
- Wait for Flash: The screen will remain blank for roughly 40 seconds (you may hear a series of beeps) until the HP BIOS Update screen opens and automatically repairs the BIOS.
Create an HP BIOS Recovery USB Flash Drive
If the emergency key combination does not bring up the HP BIOS Update screen, you must prepare an HP BIOS update drive on another PC:
- On a second computer, go to the HP Software and Driver Downloads website and enter your specific OMEN 30L model number (GT13-1000a / 207P7AV).
- Download the latest BIOS update file, launch it, and select Create Recovery USB flash drive.
- Insert the newly created USB flash drive into your turned-off OMEN desktop.
- Hold Windows + B while holding the Power button for 2 to 3 seconds to initiate the BIOS flash from the USB drive.
Full CMOS & Embedded Controller Reset
If the boot loop interferes before keys can be pressed, perform a full hardware power drain:
- Embedded Controller Reset: Turn off the PC, unplug the AC power cord for 5 seconds, plug it back in, and turn on the system.
- Hardware CMOS Drain: Disconnect the power cable, press the power button 10 times to clear residual power, open the case to remove the CMOS battery, hold the power button down for 60 seconds, reinstall the battery, reconnect power, and hold the power button for 20 seconds upon boot.
Secure Boot troubleshooting guide
HP Desktop PCs - Recovering the BIOS (Basic Input Output System)
Take care and have an amazing day!
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.