How to change network

[Jimw20]

How to change network settings on a hp laserjet m140we

[Max3Aj]

@Jimw20, Hello and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

To change the network settings on your HP LaserJet MFP M140we printer, follow these steps:

Option 1: Restore Wi-Fi Setup Mode (Recommended for Changing Network)

This method resets the printer’s network settings so you can connect it to a new Wi-Fi network.

Steps:

1. Turn on the printer and ensure it's in a ready state.
2. Press and hold the Wireless button on the printer until the Attention light starts blinking.
3. Wait about 60 seconds until the Wireless light blinks blue. This indicates the printer is in Wi-Fi setup mode.
4. Open the HP Smart app on your computer or mobile device.
5. Follow the on-screen instructions to add the printer and connect it to your new Wi-Fi network.

Detailed guide: Restore Wi-Fi Setup Mode on HP Printers

Option 2: Use the HP Smart App

If your printer is already connected but you want to change the network:

1. Open the HP Smart app on your device.
2. Select your printer.
3. Go to Advanced Settings > Network.
4. Choose Wireless Setup Wizard or Wi-Fi Settings.
5. Follow the prompts to connect to a new network.

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support