-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Wireless and Networking
- Re: Network card with bluetooth
Create an account on the HP Community to personalize your profile and ask a question
07-27-2018 12:49 PM
I'm looking for a wireless 2x2 Dual-Band minicard with bluetooth that works with my HP EliteOne 800 G1 AiO. I bought it on Ebay recently and it didn't have bluetooth to connect to my new Bose headphones.
Where could I get one of these cards that works with this system?
Computer details:
Network cards:
Intel Ethernet Connection 1217-LM
Intel Dual Band - N7260
Processor: Intel i5 4690S 3.20 GHZ
Mainboard: HP 18E6
Chipset: Intel Hawell Rev. 06
Southbridge: Intel Q87 Rev. C1
LPCIO SMSC
Bios: HP
Version: LO1 v02.53
Solved! Go to Solution.
Accepted Solutions
07-27-2018 08:58 PM - edited 07-29-2018 12:34 PM
@BJHolk, welcome to the forum.
Here is the Maintenance and Service Guide for the AIO. In Chapter 5, Removal and Replacement Procedures All-in One (AIO) Chassis, Page 56, there is a Note: "The procedure to replace the WLAN module must be performed by an HP technician." You can read through the replacement instructions to see if you still want to replace it.
According to the specs, there are 6-USB 3.0 ports on the AIO. If it were me, I would buy a USB 3.0 wifi adapter or just a bluetooth adapter. I have used several of them with great success. You don't have to be concerned about the installation.
Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.
I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
07-27-2018 08:58 PM - edited 07-29-2018 12:34 PM
@BJHolk, welcome to the forum.
Here is the Maintenance and Service Guide for the AIO. In Chapter 5, Removal and Replacement Procedures All-in One (AIO) Chassis, Page 56, there is a Note: "The procedure to replace the WLAN module must be performed by an HP technician." You can read through the replacement instructions to see if you still want to replace it.
According to the specs, there are 6-USB 3.0 ports on the AIO. If it were me, I would buy a USB 3.0 wifi adapter or just a bluetooth adapter. I have used several of them with great success. You don't have to be concerned about the installation.
Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.
I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!