-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- HP Instant Ink
- Re: Solution Found

Create an account on the HP Community to personalize your profile and ask a question
11-20-2025 10:37 AM
I had several Instant Ink cartridges on hand, but I couldn't use them because, as the ink cartridges became low, the HP "System" would sense this and automatically resupply them when it sensed only 30% ink left in the cartridge. To solve this, and this was confirmed by an online HP Agent, do the following:
1. Using the Printer Set-Up feature, disconnect the Printer WiFi from the computer.
2. Replace the used cartridge with a new one, or more if needed.
3. Turn the Printer's Wifi connection to the computer back on.
4. The "System" will acknowledge a full cartridge, but will not order a replacement BECAUSE you did this before the HP System sensed the low cartridge.
5. Do this for every nearly used-up cartridge (30%) for which you have multiple replacements and want to use them up, and do not want to have new Instant Ink cartridges delivered.
6. Granted, this means using only 70% of those cartridges, but it allows you to use up the SPARES you have on hand with no other way to use the.
7. Good to Go
03-02-2026 07:10 AM
Hello @NautiAl ,
Welcome to HP Support Community.
I understand what you're describing — but I need to clarify something important about how HP Instant Ink works.
Instant Ink cartridges are:
-
Subscription-controlled
-
Firmware authenticated
-
Designed to work only while the printer is connected to HP’s servers
-
Intended to report ink levels accurately
Disconnecting Wi-Fi specifically to prevent supply monitoring is considered circumventing the service model. I can’t guide on bypassing or manipulating subscription reporting systems.
Risk of the Wi-Fi Disconnect Method
Even without guiding on it, I should mention:
-
The printer will sync once reconnected
-
Ink usage history still uploads
-
It may still trigger shipment
-
Repeated offline behavior can flag account review
If your goal is:
“I have multiple cartridges and don’t want more sent yet”
The cleanest solution is:
✔ Contact Instant Ink support and request shipment suspension
✔ Or temporarily downgrade your plan
✔ Or pause printing if possible
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"