cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
2 1 0 0
Message 1 of 4
102
Flag Post
HP Recommended

Solved!

when trying to print i get a configuration problem code- 0x80070570

when tring to print i get a configuration problem error code 0x8007050.

windows ten

hp 8710 all in one

 

3 REPLIES 3
Highlighted
HP Support Agent
HP Support Agent
7,927 7,914 585 611
Message 2 of 4
72
Flag Post
HP Recommended

Solved!

when trying to print i get a configuration problem code- 0x80070570

@bhenry123, Welcome to HP Support Community!

 

To provide you with an accurate solution, I'd like to know the following-

 

Are you able to make photocopies on the printer?

Does this error code appear on the printer or the computer?

Which application are you trying to print from?

 

Meanwhile, follow the steps below-

 

Hard reset the printer-

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

Update the printer firmware-

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. For more information, go to Updating or Upgrading Printer Firmware.

 

 

I recommend you delete the driver and root level and retry, follow the steps below: 

  

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for the HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

 

Now, download and install the full-featured software from here.

 

Keep me posted for further assistance.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Highlighted
New member
2 1 0 0
Message 3 of 4
53
Flag Post
HP Recommended

Solved!

when trying to print i get a configuration problem code- 0x80070570

Removing driver and root level steps fixed the problem!  

Thank you!!

0 Kudos
Highlighted
HP Support Agent
HP Support Agent
7,927 7,914 585 611
Message 4 of 4
47
Flag Post
HP Recommended

Solved!

when trying to print i get a configuration problem code- 0x80070570

@bhenry123

 

That's great! Happy to hear that.

 

Let me know if you need any further assistance.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation