Re: 41.2000 Beam Detect Malfunction - HP Support Community

wearethedeckers · ‎09-25-2017

Hello.

Intermittent printing error. Happens in all software that I print from. Happens both with single and double sided pages.

It will print several pages just fine (including duplex if that's what I set), then it shows the error and will only print a portion of whatever page is in process.

I have posted a picture of the Event Log showing the error.

I also get an error on the touch screen showing "Engine Error"

Any help is appreciated.

tim

davidzuts · ‎09-25-2017

For this printer all I can suggest is to try another toner cartridge. If it happens with another toner, then it is possible the laser/scanner has an issue.

wgonzalez_hope · ‎05-18-2018

I'm having the same issue with an m401n , have you tried switching the toner cartridge? I'm wondering if that fixed the problem if I should keep searching for the problem.

Thanks,

AlanBingham · ‎05-24-2019

Did you ever find out what the problem was and how to fix it?

Repairatrooper · ‎05-24-2019

This error is caused by either a loose connection between the scanner and the control board or a bad scanner.

Scanner part number is RM1-9135-000CN

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

41.2000 Beam Detect Malfunction

Create an account on the HP Community to personalize your profile and ask a question