59.co error on my HP color LaserJet pro MFP M476nw

Vector_Tech123 · ‎05-25-2021

I have a 59.co error on my HP color LaserJet pro MFP M476nw.

Any possible fixes?

Repairatrooper · ‎05-25-2021

Power off, make sure you are plugged directly into a wall outlet. Restart, if error persists there is no listed course of action for this product series, which means HP has deemed that the repair is likely more costly than replacing the machine.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Vector_Tech123 · ‎05-25-2021

Did this earlier, tried putting in the cartridges and restarting one by one error still persists.

Repairatrooper · ‎05-25-2021

This error is more closely associated with transfer belt drive than cartridges. On newer versions like the 477 the suggested resolution is to replace the drive motor for the itb.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

east2100 · ‎06-09-2021

If you want to fix it yourself try this.

https://h30434.www3.hp.com/t5/LaserJet-Printing/59-F0-Error-Device-is-in-error-state-and-cannot-be-r...

Create an account on the HP Community to personalize your profile and ask a question