06-09-2017 11:45 AM
The printer that we use is throwing off a 79 service error code. I have turned the printer off and on, unplugged the power cord and ethernet cable. I updated the firmware all to no avail. We are currently on a network with seven computers connected to the printer. Any help would be greatly appreciated. Thanks.
06-09-2017 03:48 PM
If it does then one of the PCs is probably sending a corrupt job to the printer.
Since there's only 7 PCs you can go ahead and check the print queues on them and clear-out any pending jobs.
If my post resolves your issue please click the accepted as solution button under it.
To thank a Tech for a post click the thumbs up button under the post.
You can even click both buttons. . .
12-19-2017 10:51 PM
I'm getting this error on our Laserjet 200 M251nw - we've restarted the printer and cleared all the print queues in our house so it's not a specific document. The printer starts up, waits about 15 seconds, and then we receive this error and it restarts. How do we resolve it?
12-20-2017 02:11 AM
I had a 79 service error yesterday on a HP Laserjet Pro M501dn. The printer sometimes booted to that error straight away. Some other times it was booting to ready state and as soon as you were plugging the usb cable, it was giving the same error again. Also, sometimes it was booting to "ready to download". So what I did:
1) Downloaded the latest firmware
2) NVRAM initialization
The problem finally fixed only when I replaced the formatter.
I put this information here and maybe it will be useful to someone.
I am not a HP employee
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!
12-26-2017 10:39 AM
I'm having the same issue on a Laserjet Pro 200 MFP.
Its caught in a bootloop, and i tried the NVRAM initialization, which i think i did right, but to no avail. Can't get to main menu to update firmware.
02-15-2018 10:56 AM
The issue is caused by the "WS Discovery" service which causes the printer to be overwhelmed with incoming network traffic responses and produces 79 error or won't print via the network. The solution is to turn off the "WS Discovery" which can only be done through the HP WebJet software.