Can HP P1606dn use HP Embedded Web Server and HP auto-on/auto off

[macscotia]

I have a Laserjet P1606dn  printer attached via ethernet to my network.  I found an article about using HP auto on/auto off to reduce power consumption and would like to do this with the 1606dn.  The article mentioned using the HP Embedded Web Server to set this up. I have tried accessing my printer via its IP address but I can't find anything in the web page that appears  similar to the pictures and settings mentioned in the article.  Are the auto-on/off and Embedded Web Server available with the P1606dn?  Do I need to update the firmware?  My current firmware date code is 20100223.  Previously I tried turning the printer on and off using a regular appliance timer but this will not turn the printer on because there is a button or switch on the front panel that needs to be pushed to turn it on.  Is there any way to configure this button to be always on?  I would appreciate some suggestions.

[ShlomiL · Accepted solution]

No,

Your printer support Auto-Off, which can be set from your Printer Properties and not from the EWS page for this model

Please see page 57 of its user guide for more detailed information:

http://h10032.www1.hp.com/ctg/Manual/c01714998

Shlomi

[macscotia]

Thank you for your information and the link to the user manual.