Can't connect to wifi

[wgabriel]

Changed my router and now my HP laserjet pro MFP M29w won't connect to my wifi.  I think i might have to reset my printer to factory setting but have no idea how thats done.

[TEJ1602]

@wgabriel, Welcome to HP Support Community!

I see that you have issues with connecting the printer to the network, follow the steps below-

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   note:

   The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Also, refer to the document HP Printers - No Connection after Router or Wi-Fi Settings Change for alternate connection methods.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!